WALKING FOOT S68 WELTING FEET W/ CUTOUT 3/8"

There is an inside and outside foot. The outside foot has the corner cut off for Welting around corners. Both feet have a   3/8"  GROOVE cut into their bottoms to accommodate the   9/32"   Welting.

This Welt Foot Set is commonly used to first make the welting by wrapping a 3/4" to 1" wide strip of fabric or vinyl or leather around 9/32" Diameter WELT. Then this welting is inserted between two pieces of furniture or auto upholstery fabric to make the actual welted seam.

Look closely at the photo and see the bottom corner of the outside foot is CUT OUT. This allows the operator to make Sharp or even 90 Degree Right Angle Turns such as in pillows or other sharp turns in auto upholstery. So if you have had trouble turning corners while welting, this is the Welt Foot Set for you.

This Welt Foot Set is available in these LISTED SIZES   (GROOVE SIZE)

1/8"       5/32"       3/16"       1/4"       5/16"       3/8"        1/2"

Please note that the LISTED SIZE refers to the actual size of the GROOVE cut into the feet and is 3/32" LARGER than the WELT SIZE.

LISTED (GROOVE) SIZE         USES WELTING SIZE

1/8"                    1/32"
5/32                    1/16"
3/16"                   3/32"
1/4"                    5/32"
5/16"                   7/32"
3/8"                    9/32"
1/2"                    13/32"

This sizing chart is for REGULAR WEIGHT Upholstery Fabrics. Very Light or Very Heavy Fabics will require DIFFERENT sizing decisions.

This foot set will fit all CONSEW 206RB/225/226R // JUKI 562/563/1508 // SINGER 111W/211W STYLE machines:

ARTISAN:  618-1    4400RB

BROTHER:  B837

CONSEW:   206RB    225    226R    244    255    277

JUKI:   DNU-241    DNU-1541    DSC-244    DSC-245    DSC-246    LS-341    LU-562    LU-563    LU-1114    LU-1508    LU-1510    LU-1560

MERCURY:  M-280L   M-280LS

MITSUBISHI:   DU-100    DU-105    LU2-400    LU2-401

NAKAJIMA:  280L   280LY-B

SAILRITE:  SR200    LONG ARM

SEIKO:   LSW-8L    STH-8BLD

SINGER:   111G    111W    211G    211W

SIRUBA:   SBE-710    SBE-715    SBE-720    SBE-725

TACSEW:  T111-155

This is the most common method of sewing welted seams in furniture or auto upholstery. This welt foot set will also sew regular seaming operations so you do not have to put your regular feet back onto the machine. Many upholstery shops just leave this set on their machines all the time!

The most common sizes of welting foot sets for auto upholstery & furniture welting are  3/16"  1/4"  and  5/16". To determine your correct LISTED SIZE, add 3/32" for your four plies of fabric to the WELT SIZE. So if you are using 5/32" welting add 3/32" for a total of 8/32" or 1/4".

These will not work on Pfaff,Adler,Durkopff.