SINGER NEW 9 PIECE SEWING MACHINE ZIPPER FOOT

All feet are BRAND NEW.

These feet purchased separately would cost FAR more than this SET.

You would have to go to several sources just to find them all.

Get them here in a complete set and you are READY TO SEW!

Some of the feet have factory code numbers stamped onto them instead of the Singer Part Numbers that we use in our computer. We have indicated the factory code numbers after the part numbers that we use.

FROM LEFT TO RIGHT

• 40322SH (P363) This is the MOST popular zipper foot used today. It is hinged to allow sewing on various thicknesses of fabric. It is very narrow with a split Center so that you can get very close to your zipper on either the left or right side of the zipper.
  
  
• MT3 (T363) This is the same as the #40322SH above but the bottom is made of TEFLON. This allows zipper setting on "Sticky" or difficult materials and fabrics.
  
  
• 12435HN (P36N) This is a RIGHT NARROW Hinged Cording Foot. This foot is used for stitching very close to Zippers, Buckles, Cording, Piping, D-Rings, Snaps, Etc.
  
  12435HW (P36) This is a RIGHT WIDE Hinged Cording Foot. This foot is used for stitching very close to Zippers, Buckles, Cording, Piping, D-Rings, Snaps, Etc. and allows for more feeding action than the Narrow version.
  
  
• S518 (P63) This is an "INVISIBLE" zipper foot. It is used to set all Concealed or Invisible Polyester or Nylon zippers. This is the Regular or Wide version. Many operators swear by this style as the only way to set invisible zippers!
  
  
• 31358HN (P36LN) This is a LEFT NARROW Hinged Cording Foot. This foot is used for stitching very close to Zippers, Buckles, Cording, Piping, D-Rings, Snaps, Etc.
  
  
• 31358HW (P36L) This is a LEFT WIDE Hinged Cording Foot. This foot is used for stitching very close to Zippers, Buckles, Cording, Piping, D-Rings, Snaps, Etc. and allows for more feeding action than the Narrow version.
  
  
• 142058N (P58N) Similar to a regular presser foot but much narrower for finer work on more delicate fabrics. It can be used to set zippers or for intricate work.
  
  
• S518N (NP63) This is an "INVISIBLE" zipper foot. It is used to set all Concealed or Invisible Polyester or Nylon zippers. This is the FINE or Narrow version. Many operators swear by this style as the only way to set invisible zippers!