Achieve perfect results with overlock seams, hems using overlock stitches, and oversewing seam edges.
This foot is equipped with a pin which acts in a similar manner as the stitch finger on a serger. When the pin is placed along the edge of the fabric, it reinforces the edge as the stitch forms, preventing tunneling of the fabric
The right side of the sole is cut away so the stitched edge of the fabric can move smoothly under the foot without any unnecessary pulling or stretching
The vari-overlock stitch on all computerized model Berninas is preprogrammed so that the right swing of the needle will fall just off and to the right of the pin, which will prevent the fabric from tunneling
Another application for this foot is sewing a narrow satin stitch. The satin stitch can be formed over the pin for a raised satin effect such as in charted needle work. Using the pin in the foot rather than knitting needles simplifies the process, especially for beginners
Owners of the artista 180 should consider using Foot #2A, which has a wider sole to better match the wider feed dog
IF YOU NEED ANY TECHNICAL ASSISTANCE CALL US AT 213-747-5022
OUR STAFF HAS BEEN SERVICING THE APPAREL INDUSTRY SINCE 1969.
On May-01-08 at 14:46:11 PDT, seller added the following information:
On May-05-08 at 08:37:41 PDT, seller added the following information:
THIS IS A Bernina Overlock Foot "Old Style" Bernina Generic Overlock / Overcast Foot This foot has a small metal stitch finger designed to stabilize the edge of the fabric when zig-zaging or overcasting. Can also be used with a seam allowance by going back and trimming close to the stitches. Consult your manual for appropriate stitch selection. Choose a stitch and a stitch width so the needle will not hit the metal stitch finger. We have no guarantee on breakage for the stitch finger.